NESS R16 Wireless Home Alarm System Kit

NESS R16 Wireless Home Alarm System Kit


The NESS Security R16 Wireless Alarm System has the ability to provide 16 Wireless alarm zones, 1 x hardwired tamper input and 1 x hard wired alarm zone as the wired input takes up zone 16. This means it can have 16 Alarm devices connected to it and 1 x tamper switch. Examples of alarm devices are movement detectors, reed switches, and smoke detectors. An example of the tamper input is the siren box tamper.

The NESS Security R16 has three arming modes Full Armed, Home mode, and Day Mode. The home area mode can be programmed for different home invasion protection mode. This means it can have home areas with devices reed switches etc that will go into alarm if opened while you are at home. The Day mode is can have zones in this area that can trigger alarms during the day when disarmed an example of day mode operation is a small siren going off when the front door to a shop is opened.

The NESS Security R16 supports 14 user keyfobs. The battery will last up to 48 hours in the event of a power failure. The main unit has an inbuilt keypad and 118db internal siren. The keypad can be easily configured for door chime operation.

The system has an inbuilt PSTN dialer for standard copper phone line connection. The alarm system can be set up for self-monitoring using voice dialing. This enables the panel to call your mobile phone when there is an alarm. When you answer you will here "alarm" "alarm" if you don't acknowledge the alarm the system will call the next mobile number programmed a maximum of two numbers are able to be called. The NESS R16 can also be set up for contact id monitoring through a call center. If you don't have a telephone line at your house the R16 will connect to a gsm dialer see monitoring options

Listed Functions

  • 16 wireless Zones
  • 1 x Alarm tamper, Zone
  • 1 x hardwired zone
  • 3 different states Armed, Home armed and Day Mode
  • Contact id and Audible Voice
  • Doorbell feature with selectable tunes
  • 14 NESS Radio Keys

Kit Includes

Ness R16 Radio control panel
2 x R12 radio PIRs including brackets 
2 x RK4 Radio keys
Plastic Siren Cover & Kitbag
Horn Speaker
Top Hat Screamer and Strobe
Cost = 
$1190 Includes parts supply and installation


NESS Wireless Devices to add to your kit


Extra NESS Keyfob

Extra key fob $48 includes GST.  




Garage Door Motor Alarm keyfob Connection

Includes power supply, NESS Auxiliary Receiver and installation/ configuration of your homes garage door motor $145 includes GST. Note this quote assumes there is a local 240-volt power socket at the garage door motor for the Receiver power supply. This installation will allow one of the buttons on the SGIII to open your garage door. It is suitable for both single story and two story homes with a single garage door.


Extra NESS Lux Wireless PIR or Extra NESS Lux Pet Immune Wireless PIR

For extra NESS LUX wireless detectors, we charge $120 per standard wireless detector and $130 per pet immune wireless detector these quoted prices include GST and complete installation. This price is only applicable if the extra detectors are installed at the same time as we install the main kit.  



NESS Wireless Smoke Detector Installed

We can install a NESS wireless smoke detector and connect it to the alarm system. Cost $110 includes GST.




NESS RR3 Micro Wireless Reed Switch

NESS RR3 Micro Radio Reed Switch supplied and installed $75 includes GST.

The NESS RR3 is ideal for window installation where no cables can be run to. An example of this is the ground floor of a two story building



NESS RR1 Supervised Radio Reed Switch

NESS RR1 Wireless Radio Reed Switch supplied and installed $87 includes GST.

The NESS RR1 is ideal for door installation and monitoring.




NESS RR2 Universal Transmitter

The NESS RR2 Universal Transmitter has onboard terminals that will detect any device that switches and inform the alarm system. An example of its use would be a separate wired alarm system in another building with the NESS RR2 connected to its alarm output relay when an alarm occurs on this system the alarm relay activates. Intern the NESS RR2 activates and sends the alarm to your NESS security system. This triggers a message to be sent informing you of the alarm on the wired panel. Cost is dependant on what you want to connect it to.


NESS Wireless Panic Pendant

NESS Wireless Panic Pendant Installed and programmed price $55 includes GST




NESS Wireless Keypad

The NESS Wireless Keypad allows wireless pin control of NESS alarm panels. It has the ability to support 15 user codes cost $150 includes GST supplied and installed.